Made in obstruction 1000 Denier Cordura (outside board) and 500 Denier (inside layer). Perfect for Dive Centers where the coats are regularly swelled to their most extreme limit. The size is obviously noticeable on the shoulder lash. The Denier Nylon Cordura is more impervious to disintegration caused by long haul rubbing and broadens the length of the weldings, as it is harder than Nylon. The midriff lash is autonomous of the air bladder. The tie can be fixed while the coat is collapsed without crushing the jumper’s stomach when the coat is swelled. Inflator with twofold air filtration framework; under the hose association stem and around the valve. The inflator can without much of a stretch be flush to expel sand and different flotsam and jetsam. The backplate framework is made by ultra-tough thermoplastic really little and smaller for delicacy. An elastic damper help grasp the tank, a second tank tie can be included. A nylon locator lash is incorporated to guarantee legitimate tank positiong without fail. 3 deplete valves for lightness change in any position. 2 expansive pockets load pockets with Velcro conclusion. Over each pocket there is a compartment for hold the weight measure and the octopus. The Start BCD is composed in Italy and made in Hungary by Cressi. CE Certification EN 250 – EN 1809. The item is secured by a 2-year restricted guarantee. 4 technopolymer D-rings of 32mm accessible: 1 over, 1 at the base of each pocket.